Functioning
The PA-01I device continuously measures the current signal connected to the input terminals (7-9) and on the basis of the measured value and the selected operating mode decides about the switch-on of the executive relay. The measuring input is galvanically isolated from the power supply of the device and the contacts, thanks to which it is also possible to connect PA-01I in series with other 4÷20 mA receivers. PA-01I can operate in four different modes selected by the FUNC knob.
Analogue relay with current input PA-01I
The PA-01I device is used to convert the analog signal 0÷20 mA/ /4÷20 mA to the signal controlling the relay output. This allows the use of sensors with an analogue output in automation systems.
Reference MAX-PA-01I
- Power supply voltage
- 9÷30 V DC
- Maximum AC-1 load current
- 8 A
- Measurement error
- 1%
- The executive element
- relay
- Contact configuration
- 1 × NO/NC
- Separation of the contact
- YES
- Power consumption (max)
- 100 mA
- Current input resistance
- 150 Ω ± 0,1 %
- Range of input signals
- 0÷20 mA
- Hysteresis setting range
- 0÷5 mA
- Measurement resolution
- 5 μA
- Hysteresis in "window" mode
- 200 μA
- Terminal
- pluggable terminal blocks 1,5 mm²
- Tightening torque
- 0,5 Nm
- Working temperature
- -25 ÷ 50 °C
- Dimensions
- 1 module (18 mm)
- Assembly
- on rail 35 mm
- Ingress Protection Marking
- IP20
Related products
